Grease-lubricated sealed angular contact ball bearings

Contact Now

Sealed  single row angular contact ball bearings have an attractive combination of design features such as low friction seals and the same load carrying capacity as open variants – features that enable new design solutions for many demanding applications. Reduced need for maintenance Sealed  single row angular contact ball bearings are ready-to-use units that are filled at the factory with the proper amount of high quality grease, under clean conditions. The cleanliness in a bearing is essential for long service life. Protection is particularly important during installation. By using sealed single row angular contact ball bearings instead of open bearings, solid contaminants are less likely to enter the bearing. Less frictional heat extends grease life Non-contact seals, which are standard on all sealed  single row angular contact ball bearings, generate less friction and frictional heat than contact seals or external lip seals. Lower operating temperatures influence grease life positive. Reduced cost of ownership Sealed  single row angular contact ball bearings are well suited for bearing arrangements where, due to limited space or for cost reasons, external seals are not practical. Their favourable design characteristics save space axially, enabling more compact machine designs.

BARDEN " HS7006E.T.P4S" Grease-lubricated sealed angular contact ball bearings

0,6 2
112 22,75

100 mm x 150 mm x 24 mm NSK 100BER10S Grease-lubricated sealed angular contact ball bearings

42 mm CX
35 5300 r/min

BARDEN 10M7HC Grease-lubricated sealed angular contact ball bearings

95 mm 18 mm
130 4700 r/min

130 mm x 200 mm x 31,5 mm NACHI 130TAH10DB Grease-lubricated sealed angular contact ball bearings

1200000 N / Static l 7.087 Inch | 180 Mil
None Cylindrical Roller B

BARDEN 1956HE Grease-lubricated sealed angular contact ball bearings

343,052 mm 343,052
CRO-6944 457,098

BARDEN 212HC Grease-lubricated sealed angular contact ball bearings

54,7 kN 108 kN
60 mm 72

FAG 234432M.SP Grease-lubricated sealed angular contact ball bearings

662 kN 270 mm
150 73 mm

FAG 234732M.SP Grease-lubricated sealed angular contact ball bearings

838 kN 60 mm
350 mm 302 mm

NTN 2LA-BNS009LLB Grease-lubricated sealed angular contact ball bearings

112,000 NTN
7960/419.5DF 300,000 mm
1/9